Two-step non-local means method for image denoising

Multidimensional Systems and Signal Processing - Non-local means (NLM) method is a powerful technique in the field of image processing. The center weight CW (the weight of the pixel to be denoised)...     

Efficient overall water splitting over a Mo(IV)-doped Co3O4/NC electrocatalyst

To meet the demand of producing hydrogen at low cost, a molybdenum (Mo)-doped cobalt oxide (Co₃O₄) supported on nitrogen (N)-doped carbon (x%Mo–Co₃O₄/NC, where x% represents Mo/Co molar ratio) is developed as an efficient bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). This defect engineering strategy is realized by a facile urea oxidation method in nitrogen atmosphere. Through X-ray diffraction (XRD) refinement and other detailed characterizations, molybdenum ion (Mo⁴⁺) is found to be doped into Co₃O₄ by substituting cobalt ion (Co²⁺) at tetrahedron site, while N is doped into carbon matrix simultaneously. 4%Mo–Co₃O₄/NC is the optimized sample to show the lowest overpotentials of 91 and 276 mV to deliver 10 mA cm^?2 for HER and OER in 1 M potassium hydroxide solution (KOH), respectively. The overall water splitting cell 4%Mo–Co₃O₄/NC||4%Mo–Co₃O₄/NC displays a voltage of 1.62 V to deliver 10 mA cm^?2 in 1 M KOH. The Mo⁴⁺ dopant modulates the electronic structure of active cobalt ion (Co³⁺) and boosts the water dissociation process during HER, while the increased amount of lattice oxygen and formation of pyridinic nitrogen due to Mo doping benefits the OER activity. Besides, the smaller grain size owing to Mo doping leads to higher electrochemically active surface area (ECSA) on 4%Mo–Co₃O₄/NC, resulting in its superior bifunctional catalytic activity.     

Flame characteristics of premixed H2-air mixtures explosion venting in a spherical container through a duct

The explosion venting duct can effectively reduce the hazard degree of a gas explosion and conduct the venting energy to the safe area. To investigate the flame quantitative propagation law of explosion venting with a duct, the effects of hydrogen fraction and explosion venting duct length on jet flame propagation characteristics of premixed H₂-air mixtures were analyzed through experiment and simulation. The experiment results under initial conditions of room temperature and 1 atm show that when hydrogen fraction was high enough, part of the unburned hydrogen was mixed with air again to reach an ignitable concentration, resulting in the secondary combustion was easier produced and the duration of the secondary flame increased. With the increase of venting duct length, the flame front distance and propagation velocity increased. Meanwhile, the spatial distribution of pressure field and temperature field, and the propagation process and mechanism of the flame venting with a duct were analyzed using FLUENT software. The variation of the pressure wave and the pressure reflection oscillation law in the explosion venting duct was captured. Therefore, in the industrial explosion venting design with a duct, the hazard caused by the coupling of venting pressure and venting flame under different fractions should be considered comprehensively.     

Adaptive pixel-block based background subtraction using low-rank and block-sparse matrix decomposition

Multimedia Tools and Applications - We present three stages of a novel backgrounds subtraction method in this paper: a new pixel-block based randomized arrangement is utilized to preprocess all the...     

18F-NaF注射液的制备及新西兰兔骨折显像

由外伤或肿瘤骨转移造成的隐匿性骨折和愈合情况的准确诊断对制定合适的治疗方案具有非常重要的意义。为考查¹⁸F-NaF PET显像用于骨折诊断的诊断效能，本研究制备了¹⁸F-NaF注射液，并对其进行了质量控制和稳定性研究，然后建立新西兰兔骨折动物模型，模型建立约2周后进行了¹⁸F-NaF PET显像和⁹⁹Tc^m-亚甲基二磷酸盐（⁹⁹Tc^m-MDP）SPECT显像的自身对照实验，并对显像效果进行了比较。结果表明：¹⁸F-NaF的产量大于37 GBq，各项检验结果均符合质控要求，40 ℃下放置8 h和30 ℃下放置10 h所有检验结果均无明显变化；¹⁸F-NaF PET和⁹⁹Tc^m-MDP SPECT两种显像方式均可见全身骨骼，骨折部位呈明显放射性浓聚，但¹⁸F-NaF给药后30 min即可进行PET显像，骨折部位显示更为清晰，骨折部位与对侧正常骨骼的放射性摄取比（T/NT）明显高于⁹⁹Tc^m-MDP，而⁹⁹Tc^m-MDP需在给药后2 h才能进行SPECT显像。本研究表明¹⁸F-NaF PET对骨折的显像性能优于⁹⁹Tc^m-MDP，可明显提高检查流通量和诊断效能。     

瓦斯抽采集成旁通阀二位放水器研制

针对井下瓦斯抽采中原放水器配气阀安装不规范、双截止阀使用繁琐、工人劳动强度大等现状,研制了具有集成调控装置的放水器,能够实现一个阀门控制所有气路和水路,自主放水和负压排水,从源头上杜绝了瓦斯喷孔和水流溢出等情况,大大降低了职工的劳动强度,实现了井下抽采系统安全可靠运行。     

轧制与退火对T9S钛合金板材组织与性能的影响

研究了轧制变形量及退火温度对T9S钛合金板材显微组织和室温力学性能的影响。结果表明:增加成品轧制变形量,板材组织破碎更充分,退火后形成等轴α相、拉长α相和晶间β相组织形貌,变形流线比较明显,板材室温强度和硬度升高,伸长率降低,弹性模量增加。随着退火温度升高,板材室温强度和硬度逐渐降低,伸长率逐渐提高,横向弹性模量逐渐减小,纵向弹性模量先增加后减小。经(750~790) ℃×45 min空冷退火处理后的板材可以获得较好的强度和塑性的匹配。     

支撑柱缺位对弧面钢化真空玻璃支撑应力的影响

根据弹性力学、柱壳理论及数学微分法建立了弧面钢化真空玻璃力学模型,基于ANSYS有限元数值分析模拟,分析了3 mm厚弧面钢化玻璃基板不同部位支撑柱缺位对弧面钢化真空玻璃的支撑应力和弯曲变形的影响.研究结果表明,支撑柱缺位对其周围支撑应力影响较大.在中间和角落部位,当支撑柱连续缺位数量超过2个,最大应力为117.77 MPa,最大变形量为0.566 mm;在边缘部位,当支撑柱连续缺位数量超过3个,最大应力为96.183 MPa,最大变形量为0.217 mm,均超过安全允许范围.该研究对弧面钢化真空玻璃的质量检测具有指导意义.     

汽车扭力梁侧倾工况性能设计

主要阐述侧倾工况下扭力梁3个重要性能指标及其设计方法,即侧倾角刚度、侧倾前束角变化梯度和侧倾外倾角变化梯度。介绍相关结构参数和性能指标,建立整车-系统-结构三级性能指标的分解关系,提出一种侧倾性能结构布置长方体设计理念,通过汇总统计扭力梁结构参数和性能指标总结其常用范围,为扭力梁的性能设计提供参考。